Showing 73–84 of 306 results

• 

  Can Seam Micrometers – Series 147

  Starting at $157.50

  Measures the width, height, and depth of can seams.
  Three types of micrometers are available for: steel cans, aluminum cans, and sprayer cans.
  Supplied in fitted carton.

  Select options
• 

  Center Line Gage – Series 1

  Starting at $54.63

  Pairs of conical probes are specially designed for Digimatic, Dial and Vernier calipers to quickly measure center line distances.

  Select options
• 

  Center Master

  Starting at $131.40

  – Allows quick measurement of center-to-center distance between holes
  – Measurable hole diameters: Ø1-Ø38mm/.040″–1.50″

  Select options
• 

  CERA Caliper Checker Series 515

  Starting at $4,068.00

  – The CERA Caliper Checker is designed to inspect vernier, dial and Digimatic calipers. It is comprised of permanently wrung, high-grade CERA gage blocks in a protective casting.
  – The CERA Caliper Checker also stands perpendicular to a surface for height gage inspection.
  – The zirconia based ceramic CERA measuring blocks are corrosion resistant and dimensionally stable.

  Select options
• 

  CERA Caliper Checker Series 515 Accessories

  $297.90

  Select options
• 

  Ceramic Setting Ring – Series 177 – Accessories for Inside Micrometers, Holtest, and Dial Bore Gauges

  Starting at $231.30

  – No more anti-corrosion treatment is required when handling Ceramic Setting Rings normally,resulting in simple maintenance and storage.

  Select options
• 

  Color Ratchet & Color Speeder

  Starting at $4.19

  Select options
• 

  Color Spindle Caps – Optional Accessories for Digimatic and Dial Indicators

  Starting at $0.95

  8 colors of spindle caps are available for dial indicators with a range of 10mm or less.

  Select options
• 

  Comparator Stand – Series 215

  Starting at $612.90

  Comparator Stands have a very stable, cast iron which enables precise measurement.
  The partially serrated anvil prevents very flat work pieces from wringing to it and the 2.3µm flatness (or better) promotes accurate measurement.
  The215-505-10model has a threaded column which enables easy and precise coarse adjustment.
  Serrated anvils 110x110mm are supplied With 215-405-10, and 150x150mm with 215-505-10 models.

  Select options
• 

  Contact Points for Dial & Digimatic Indicators

  Starting at $5.40

  Select options
• 

  Contact Sensor

  $115.20

  – The Contact Sensor eliminates errors caused by jacking-up the height gage too much while taking measurements. When the scriber of a height gage touches a conductive work piece, an indicator will light up to indicate that measurement can be taken, which will result in consistent height measurements
  – Power supply: SR-44, 2 pcs.

  Select options
• 

  Coolant-proof Micrometer – Series 293 with Dust/Water Protection Conforming to IP65 Level

  Starting at $164.70

  Coolant Proof Micrometers MDC-MX Series
  Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency

  IP65 protection level, enabling use in environments exposed to cutting oil, etc*.
  *Anti-corrosion treatment is required after use.

  Measurement data output function is available with a water-resistant connection cable.

  Auto power ON/OFF function. • Certificate of inspection* is included.
  (50mm/2” or less range models) *It is not the type used to obtain calibration certificates.

  With a standard bar except for 0-25mm/0-1″ model.
  Supplied in fitted case. Plastic case up to 150mm/6″, Wooden box over 150mm/6″

  Select options