ABSOLUTE Back-Jaw Centerline Caliper – Series 573 – Center-to-Center & Edge-to-Center Types

Calipers

Showing 1–12 of 28 results

  • Starting at $1,089.00

    Specially designed to measure the distance between two centers or the distance from an edge to center.
    Provided with jaws on the back of the slider, measurements can be read easily by looking down.
    Direct reading of pitch measurements is available due to the offset value setting function.
    With SPC data output.
    Supplied fitted in wooden case.

  • Starting at $193.50

    Can be used in workshop conditions exposed to coolant, water, dust or oil.
    Easy to use – no need to wipe or clean the scale.
    Advanced design styling.
    Incorporates absolute measurement system.
    Automatic power-on/off.
    Data output function.
    With thumb roller.
    Supplied in fitted plastic case.

  • Starting at $843.30

    Accuracy: Refer to the list of specifications.
    Resolution: 0.01mm or .0005″/0.01mm
    Display: LCD
    Scale type: ABSOLUTE electromagnetic linear encoder
    Max. response speed: Unlimited
    Battery: SR44 (1 pc.), 938882
    Battery life: Approx. 5,000 hours in continuous use
    Dust/Water protection level: IP66
    Standard accessory: Jaw clamps (2 pcs.), 05GZA033

  • Starting at $486.90

    •The rounded faces of the jaws are ideal for accurate ID (inside diameter) measurement.
    •Inside and outside measurements can be directly read from the upper and lower slider graduations (Series 160).
    •With fine-adjustment carriage type is available (Series 160).
    •Parallax-free vernier scale type is available for easy and positive measurement (Series 160).
    •With SPC output (Series 550).
    •Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.

  • Starting at $133.20

    Mitutoyo’s absolute Digimatic Caliper is the next generation of electronic calipers. It keeps track of its origin point once set. Whenever turned on, the large LCD displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology, as well as no more concern for over speed errors.

    Large and clear LCD readout.
    The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
    Data Hold Unit (959143) is optional.
    Carbide-tipped jaw type calipers are also available.
    With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
    Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.

  • Starting at $536.40

    The rounded faces of the jaws are ideal for accurate ID (inside diameter) measurement.
    With SPC output.
    Supplied in fitted plastic holster in carton.18″/450mm and larger supplied wooden case.

  • Starting at $400.50

    Specially designed for inside measurements in hard-to-reach places.
    With SPC data output. (Series 573)
    Supplied in fitted plastic case. 18in /450mm and 24in/600mm supplied in wooden case.

  • $760.50

    Due to the low measuring force these calipers are ideal for elastic or resilient work pieces such as plastic parts and rubber parts that standard calipers cannot measure. With SPC data output. Supplied in fitted plastic case.

  • Starting at $363.60

    The ABSOLUTE Digimatic snap caliper features a spring-loaded mechanism to allow quick and efficient GO/NO-GO inspection for mass production parts.
    With SPC data output.
    Supplied in fitted plastic case.

  • Starting at $166.50

    Mitutoyo’s Absolute Solar Digimatic Caliper retains its origin point even if the display turns off for the entire life of the caliper. At 60 Lux and up the ABSOLUTE solar caliper is, turned on ready to start measurement.
    No more repeated zero setting caused by the shortage of light intensity.
    Hard-coated solar panel for safe operation.
    No fear for overspeed errors.
    With thumb roller.
    Supplied in fitted plastic case.

  • Starting at $352.80

    The thin blade type jaws fit into very small grooves and making previously difficult outside measurements far easier to obtain.
    The OD measuring faces are carbide-tipped.
    With depth bar.
    With SPC data output. (Series 573)
    Supplied in fitted plastic case.

  • Starting at $54.63

    Pairs of conical probes are specially designed for Digimatic, Dial and Vernier calipers to quickly measure center line distances.