Showing 157–168 of 306 results
-
Starting at $492.30– The Holtests (type II) have three contact points made of alloyed steel.
– Measurement can be taken closer to the bottom of the blind bore.
– Can measure deep holes using an Extension Rod (optional).
– With Ratchet Stop for constant force.
– Setting Rings for zero point adjustment are optional.
– Supplied in fitted plastic case up to 100mm / 4”. Over 100mm / 4” supplied in wooden case. -
Starting at $82.17 -
Starting at $539.10These Holtests are versatile, self-centering three-point internal micrometers for the accurate and efficient direct-measurement of internal diameters. Three anvils, evenly spaced at 120° apart, contact the internal wall surfaces and find true alignment with the axis of the bore for accurate ID measurement.
TiN-coated measuring contact points(over 6mm/.275″ range models) provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole.
Highly durable because of carbide-tipped contact points (anvils).
Measurement can be taken closer to the bottom of the blind bore.
Can measure deep holes using an Extension rod (optional) which is available on models over 6mm (.275″) measuring range.
With Ratchet Stop for constant force.
Setting Rings for zero point adjustment are optional.
Supplied in fitted plastic case up to 100mm / 4”. Over 100mm / 4” supplied in wooden case. -
Starting at $8,091.00The new frame design alllows the full 7.1” of specimen capcity without the need to cut a whole in the table.
Simple to operate; The digital HR320 model uses a flashing bar graph to indicate when the initial test force has been reached.
430 models feature automatic brake and automatic start function that prevents overloading and begins test cycle. The HR430 model also includes the dial a weight system for easier load selection.
All models are complete with Flat and VEE anvils, diamond and 1/6” carbide ball indenters, 2 HRC and 1 HRBW Rockwell blocks (MR models)s or 3 Rockwell blocks and an HR30N and HR30TW for MS testers -
Starting at $12,150.00Multiple test force generation for Rockwell, Rockwell Superficial and Brinell hardness.
Dolphin-nose indenter arm for easy reach of interior (min. ø40mm/ø22mm*) and exterior surfaces. *When using an optional diamond indenter (19BAA292).
Real time electronic test force control for accurate loading. This perfectly eliminates load force overshooting.
Indenter escape function for continuous testing at fixed table position. This eliminates instability caused by the table retraction.
Auto-stop elevation table and automatic preliminary test force loading to provide stable test force generation.
Complete with one flat and VEE anvil, diamond and 1/16” carbide ball indenters, 2 HRC and 1 HRBW Rockwell test blocks and an HR30N and HR30TW test block. -
Starting at $197.10Measures hub thickness and shoulders inside a bore.
With Ratchet Stop for constant force.
With a standard bar except for 0 -25mm /0-1in model.
Supplied in fitted plastic case. -
Starting at $18.00
-
$20,160.00Heavy load Vickers testing machines feature motorized force selection from 1-50kgf or .3 to 30kgf. Fully adjustable long-life LED illumination runs cool.
A dual-line filar eyepiece combines with a color touch-screen LCD to create accurate measurements with the touch of a button.
The motorized turret can accommodate up to 3 long working distance objective lenses for an even wider range of materials and a wide variety of anvils and x-y stages are also available. -
$26,730.00The Type B HV110/ HV120 Vickers hardness testers add computer control to make measurements even more repeatable.
A high-resolution 3 mega-pixel camera produces crisp images that are automatically measured in less than .3 seconds. SPECIFICATIONS
Various software functions such as automatic light intensity, simple to use report generator and programming wizards make tedious and repetitive testing requirements more accurate than manual testing and eliminates common operator errors.
The Type D HV110 / 120 adds a motorized X-Y stage with up to 100mm x 100mm of travel for large samples. A motorized focusing platform is also utilized for a complete walk away system.*Other specifications as Type A testers
** Optional test forces may be required -
$13,410.00The i-Checker is specially designed to calibrate measuring accuracy of dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4″).
±(0.2+L/100)µm indication accuracy.
Directly inspects an indicator with a stroke of up to 100mm (4″). The dial test indicator, bore gage and lever-type inductive head can be inspected with optional accessories.
Adjustment of the measurement position is very easily accomplished because of semi-automatic measurement and full automatic measurement functions.
Creates and prints out the simple inspection certificate.
Saves inspection result as CSV file for reusable inspection result by any kind of software. -
Starting at $4.50