Spindle Attachment Tip

Starting at $8.46

Tip length: metric type:10mm ±5μm inch type: .5″ ±.0002″
Spindle Dia: *1 .250” / 6.35mm
*Spindle diameter for 101469
(.250″ ball) is .315″/ 8mm

Clear
Qty:

Description

SKUModel TypeDIAPriceBuyhf:att:pa_colorhf:att:pa_item-type
208062*Spline Attachment.078" DIA.$33.93
Qty:
208098Spline Attachment.078" DIA.$33.93
Qty:
208063*Comparator Attachment039" tip x 30°$33.93
Qty:
208099Comparator Attachment039" tip x 30°$33.93
Qty:
208064*Blade Attachment.029" thickness$33.93
Qty:
208100Blade Attachment.029" thickness$33.93
Qty:
208065*Knife-edge Attachment019" tip x 30°$33.93
Qty:
208101Knife-edge Attachment019" tip x 30°$33.93
Qty:
208066*Disk Attachment.500" DIA. Ball$33.93
Qty:
208102Disk Attachment.500" DIA. Ball$33.93
Qty:
101468Ball Attachment.200" DIA. Ball$8.46
Qty:
101469Ball Attachment.250" DIA.$9.95
Qty:

Technical Data

Tip length: metric type:10mm ±5μm inch type: .5″ ±.0002″
Spindle Dia: *1 .250” / 6.35mm
*Spindle diameter for 101469
(.250″ ball) is .315″/ 8mm

To measure odd workpieces, several convenient anvil attachments are prepared by MITUTOYO. Among them the most often used one is the ball attachment.

The ball attachments are hardened steel balls with .200” and .250” diameters which are placed on the .250” and .315” diameter anvils, respectively, by rubber caps. With these attachments, regular micrometers can measure cylindrical wall thickness, .200” or .250” must be subtracted from the readings.

Other attachments shown here are either .500” or 10mm in length. The added amount must be subtracted from the reading.

Additional information

Weight N/A
Dimensions N/A
Model Type

Spline Attachment, Comparator Attachment, Blade Attachment, Knife-edge Attachment, Disk Attachment, Ball Attachment

DIA

.078" DIA., 039" tip x 30°, .029" thickness, 019" tip x 30°, .500" DIA. Ball, .200" DIA. Ball, .250" DIA.