Showing 205–216 of 306 results

• 

  Optional Styli for Surface Roughness Measurement

  Starting at $222.30

  Compatible with: SJ-410, SJ-500, SV-2100, SV-3100,SV-3000CNC, SV-M3000CNC, SV-C3200, SV-C4500 Series

  Select options
• 

  Outside Micrometers – Series 101

  Starting at $130.50

  Satin-chrome-finished frame, tapered (on the anvil side) for hard-to-reach places.
  With a standard bar except for 0-1″ models.
  Supplied in fitted plastic case.
  .0001 reading is obtained with vernier

  Select options
• 

  Outside Micrometers – Series 102

  Starting at $112.50

  Heat-insulated frame, tapered (on the anvil side) for hard-to-reach places.
  With a standard bar except for 0-25mm
  A ratchet stop for a constant measuring force.
  Supplied in a fitted plastic case.

  Select options
• 

  Outside Micrometers – Series 103 INCH

  Starting at $100.80

  Hammertone-green, baked-enamelfinished frame.
  Ratchet Stop or Friction Thimble for exact repetitive readings.
  With a standard bar except for 0-1″ model

  Select options
• 

  Outside Micrometers – Series 103 INCH Sets

  Starting at $362.70

  Select options
• 

  Outside Micrometers – Series 103 METRIC

  Starting at $100.80

  Hammertone-green, baked-enamelfinished frame.
  Ratchet Stop for exact repetitive readings.
  With a standard bar except for 0-25mm model.

  Select options
• 

  Outside Micrometers – Series 103 METRIC Sets

  Starting at $362.70

  Select options
• 

  Outside Micrometers – Series 107

  Starting at $419.40

  With dial indicator for direct GO/NG-GO judgment for mass-produced parts.
  Anvil retracting trigger for quick measurement.
  With a standard bar except for 0-25mm model.
  Supplied in fitted plastic case.

  Select options
• 

  Outside Micrometers – Series 406 – Non-Rotating Spindle Type

  Starting at $690.30

  With a standard bar (except for 0-25mm/0-1in model)
  With SPC output
  Supplied in a fitted plastic case.

  Select options
• 

  Outside Micrometers Series-105 with Extension Anvil Collars

  Starting at $1,260.00

  Wide measuring range with extension anvil collars.
  50mm spindle stroke.
  With Ratchet Stop for constant force.
  Supplied with zero-setting standards bar for each range.
  Square and round pipes are combined for light weight and rigid frame (for models over 1000mm range).
  Workpiece stopper (for models over 1000mm range).
  Supplied in a fitted wooden case.

  Select options
• 

  Outside Micrometers-Series 340,104-with Interchangeable Anvils

  Starting at $189.90

  IP65 water/dust protection 340 series models with a range up to 12in/300mm.
  Wide measuring range with interchangeable anvils.
  With a Ratchet Stop for constant force.
  Supplied with zero-setting standards bar for each range.
  With SPC output (Series 340).
  Supplied in fitted wooden case.

  Select options
• 

  Pana Micrometers – Series 116 – Interchangeable Anvil Type

  Starting at $462.60

  Non-rotating spindle with optional seven interchangeable anvils (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications.
  Interchangeable anvils (pair) are optional.
  With a standard bar except 0 – 25 mm and 0-1” model.
  V-anvils and conical spindle tips (matching pair) for screw thread measurement are also available.
  With Ratchet Stop for constant force.

  Select options