Shop

Showing 289–300 of 306 results

  • Tube Micrometers – Series 395
    Starting at $387.90

    IP65 water/dust protection (Series 395).
    Designed to measure the wall thickness of various tubing.
    The Tube Micrometers have two combinations of measuring faces (carbidetipped): spherical-flat type.
    Cylindrical anvils (perpendicular) are also available.
    With Ratchet Stop for constant force.
    With SPC output (Series 395).
    With digit counter (Series 295).
    With a standard bar except 0-25mm and 0-1” model.
    Supplied in fitted plastic case.

    Select options

  • Tube Thickness Caliper – Series 573, 536 – ABSOLUTE Digimatic and Vernier Type
    Starting at $350.10

    The main scale jaw is a round bar that facilitates measurements of tube wall thickness.
    With SPC data output. (Series 573)
    Supplied in fitted plastic case.

    Select options

  • Tubular Inside Micrometers Series 133 – Single Rod Type
    Starting at $168.30

    With locking clamp.
    Zero point can be readjusted by twisting the micrometer head sleeve. A key wrench is supplied.
    Clear, crisp graduations on the satin chrome finished micrometer head.
    Carbide-tipped measuring faces.
    Supplied in fitted plastic case.Over 200mm/8in supplied in wooden case.

    Select options

  • Tubular Inside Micrometers Series 137 – Extension Rod Type, Series 139 – Extension Pipe type, Series 140 – Extension Pipe Type
    Starting at $124.20
    • Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head.
    • Carbide-tipped measuring faces are available. (series 137)
    • The 139 and 140 series use highly-durable/ large-diameter extension pipes.
    • Series 137 supplied in fitted plastic case except 1550mm/60in come in wooden case.
    • Series 139 supplied in fitted wooden case except 500mm/20in come in plastic case.
    • Series 140 supplied in fitted wooden case.
    Select options

  • UDT-2 Dial Gage Tester – Series 170
    $2,034.00

    The UDT-2 Dial Gauge Tester consists of a specially designed 0-1” / 0-25mm microme¬ter head, with a large disc, and rigid holding fixtures. Gauge tester to calibrate measuring accuracy of dial indicators, dial test indicators and dial bore gauge.
    Clamping stem diameter—170-102-10: 6mm and 8mm, 170-101-10: .25″ and .375″
    With the optional stand (21AKK824), inspection of Dial Bore Gauges becomes possible to perform.

    Select options

  • Uni-Mike – Series 317, 117 – Interchangeable Anvil Type
    Starting at $192.60

    IP65 water/dust protection (Series 317)
    Measures tubing thickness, shoulderedge distance, rivet head height, etc. with interchangeable anvils (flat anvil, rod anvil,V-anvil).
    Supplied with Flat Anvil (201216) and Rod Anvil:
    ø3mm/.118” rod anvil (201217) for 0-25mm/0-1” models, ø5mm/.197” (201379) for 25-50mm / 1-2” model.
    With special Disk Anvils. The Uni-Mike is used as a height micrometer.The disks have a lapped, mirror surface.
    With a standard bar except
    0-25mm and 0 -1” model.
    Supplied in fitted plastic case.

    Select options
  • Placeholder

    Uni-Mike – Series 317, 117 – Interchangeable Anvil Type Accessories
    Starting at $14.00
    Select options

  • V-Anvil Micrometers – Series 314, 114 – 3 & 5 Flutes
    Starting at $337.50

    Measures the outside diameter of cutting heads(such as taps,reamers,end mills) with odd number of flutes.
    With Ratchat Stop for constant force.
    Supplied with setting standard.
    V-anvils with a centerline grove are available.They are useful for measuring pitch diameters of of taps which have a small diamter by using single-wire method.
    With SPC output (Series 314).
    Supplied in fitted plastic case.

    Select options

  • Vernier Caliper – Series 160 – with Nib Style Jaws and Fine Adjustment
    Starting at $447.30

    The jaws have round measuring faces for accurate ID measurement.
    With fine adjustment carriage to feed the slider finely. (without 160-130~134)
    Inside and outside measurements can be directly read from the upper and lower slider graduations, respectively.
    Supplied with vinyl holster in fitted carton. Except 300mm / 12”, 450mm/18” and 600mm/24” are fitted carton only. Over 600mm/24” supplied in wooden case.

    Select options

  • Vernier Caliper Series 531 with Thumb Clamp
    Starting at $88.61

    The slider moves only when the spring loaded thumb clamp is depressed.
    Can measure OD, ID, depth, and steps
    Supplied with vinyl holster in fitted carton.

    Select options

  • Vernier Caliper Series 532 with Fine Adjustment
    Starting at $102.60

    Provided with a fine-adjustment carriage to feed the slider finely.
    Can measure OD, ID, depth, and steps.
    Supplied with vinyl holster in fitted carton.

    Select options

  • Vernier Calipers Series 530 – Standard Model
    Starting at $70.38

    Measures OD (outside diameter), ID (inside diameter), depth, and steps.
    The small vernier face angle (14°) provides easy reading.
    Dual reading scales on vernier. (metric/inch and inch models only)
    Lock screw for holding the sliding jaw position.

    Select options